Nissan Sentra Service Manual: Exterior lighting system

Door mirror remote control switch

Removal and Installation Removal Remove the instrument finisher D. Refer to IP-14, "Exploded View". Using suitable tool (a) release the pawls and remove the door mirror remote cont ...

Precaution

...

Other materials:

M&A branch line circuit
Diagnosis procedure 1.Check connector Turn the ignition switch off. Disconnect the battery cable from the negative terminal. Check the terminals and connectors of the combination meter for damage, bend and loose connection (unit side and connector side). Is the inspection result nor ...

Hazard switch
Component function check 1.Check hazard switch signal by consult Consult data monitor Turn ignition switch ON. Select hazard sw of bcm (flasher) data monitor item. While operating the hazard switch, check the monitor status. Is the inspection result normal? Yes >> hazard swi ...

Checking bulbs
With all doors closed, apply the parking brake and place the ignition switch in the ON position without starting the engine. The following lights will come on: If equipped, the following lights come on briefly and then go off: If any light fails to come on, it may indicate an open circuit ...