Nissan Sentra Service Manual: Electrical units location
Electrical units location
Engine compartment
Passenger compartment
Luggage compartment
Ground
Ground distribution
Main harness
Engine room harness
Engine control harness
Body harness
...
Harness connector
Description
Harness connector (tab-locking type)
The tab-locking type connectors help prevent accidental looseness or
disconnection.
The tab-locking type connectors are disconnected by pushi ...
Other materials:
Engine oil and oil filter recommendations
Selecting the correct oil
It is essential to choose the correct grade, quality
and viscosity engine oil to ensure satisfactory
engine life and performance. See “Recommended
fluids/lubricants and capacities” in this
section. NISSAN recommends the use of an
energy conserving oil in order ...
Brake pedal
Adjustment
BRAKE PEDAL HEIGHT
Remove instrument lower panel LH. Refer to IP-21, "Removal and
Installation".
Disconnect the harness connectors from the brake pedal position switch
(if equipped) and the stop lamp
switch.
Turn the stop lamp switch and brake pedal position swi ...
Adjustment of steering angle sensor neutral position
Description
Refer to the table below to determine if adjustment of steering
angle sensor neutral position is required.
×: Required –: Not required
Work Procedure
ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION
CAUTION:
To adjust neutral position of steering angle sensor, ...
