Nissan Sentra manuals

Nissan Sentra Service Manual: Ecu diagnosis information

Abs actuator and electric unit (control unit)

Reference Value

VALUES ON THE DIAGNOSIS TOOL

CAUTION:

The display shows the control unit calculation data, so a normal value might be displayed even in the event the output circuit (harness) is open or short-circuited.








Note 1: Confirm tire pressure is normal.


Note 1:

Confirm tire pressure is normal. Note 2

: On and off timing for warning lamps and indicator lamps.

Fail-safe

VDC AND TCS FUNCTIONS

VDC warning lamp in combination meter turns ON when a malfunction occurs in system [ABS actuator and electric unit (control unit)]. The control is suspended for VDC and TCS functions. However, ABS and EBD functions operate normally.

ABS FUNCTION

ABS warning lamp and SLIP indicator lamp in combination meter turn ON when a malfunction occurs in system [ABS actuator and electric unit (control unit)]. The control is suspended for VDC, TCS and ABS functions.

However, EBD functions operate normally.

EBD FUNCTION

ABS warning lamp, brake warning lamp and SLIP indicator lamp in combination meter turn ON when a malfunction occurs in system [ABS actuator and electric unit (control unit)]. The control is suspended for VDC, TCS, ABS and EBD functions.





DTC Inspection Priority Chart


DTC Inspection Priority Chart

When multiple DTCs are displayed simultaneously, check each one using the following priority list.

DTC Index


DTC Index


Wiring diagram


Diagnosis system [abs actuator and electric unit (control unit)]
CONSULT Function (ABS) FUNCTION CONSULT can display each diagnostic item using the following direct diagnostic modes. Direct Diagnostic Mode Description ECU identification T ...

Wiring diagram
Brake control system Wiring Diagram ...

Other materials:

DTC/circuit diagnosis
U1000 CAN COMM CIRCUIT Description CAN (Controller Area Network) is a serial communication system for real time application. It is an on-vehicle multiplex communication system with high data communication speed and excellent error detection ability. Many electronic control units are equip ...

Cleaning
If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer fluid or a mild detergent. Your windshield is clean if beads do not form whe ...

Combination switch
Exploded view Combination switch Combination switch harness connector Front NOTE: Shown with the steering wheel removed for clarity only. Removal and installation REMOVAL CAUTION: Before servicing, turn the ignition switch OFF, disconnect both battery terminals and wait at l ...

В© 2014-2024 Copyright www.nisentra.com