Nissan Sentra Service Manual: ECU diagnosis information

Diagnosis system (BCM) (without intelligent key system)

Common item Common item : consult function (bcm - common item) APPLICATION ITEM CONSULT performs the following functions via CAN communication with BCM. Direct Diagnostic Mode Descriptio ...

Wiring diagram

Tire pressure monitoring system With intelligent key WITH INTELLIGENT KEY : Wiring Diagram Without intelligent key WITHOUT INTELLIGENT KEY : Wiring Diagram ...

Other materials:

P2096, P2097 A/F Sensor 1
DTC Logic DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible Cause P2096 POST CAT FUEL TRIM SYS B1 (Post catalyst fuel trim system too lean bank 1) The output voltage computed by ECM from the A/F ...

Diagnosis description : counter system
RELATIONSHIP BETWEEN MIL, 1ST TRIP DTC, DTC, AND DETECTABLE ITEMS When a malfunction is detected for the first time, the 1st trip DTC and the 1st trip freeze frame data are stored in the ECM memory. When the same malfunction is detected in two consecutive trips, the DTC and the freeze ...

U1000 CAN Comm circuit
Description Can (controller area network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each co ...