Nissan Sentra manuals

Nissan Sentra Service Manual: Ecu diagnosis information

BCM, IPDM E/R

List of ECU Reference

Wiring diagram


Diagnosis system (ipdm e/r) (without intelligent key system)
Diagnosis Description AUTO ACTIVE TEST Description In auto active test, the IPDM E/R sends a drive signal to the following systems to check their operation. Front wiper (LO, HI) Parking la ...

Wiring diagram
Headlamp Wiring diagram Daytime light system Wiring diagram Auto light system Wiring diagram Front fog lamp Wiring diagram ...

Other materials:

Hoses
HOSE REMOVAL AND INSTALLATION To prevent damage to rubber hose, do not pry off rubber hose with tapered tool or screwdriver.         To reinstall the rubber hose securely, make sure that hose insertion length and orientation is correct. (If tube is equipped with hose ...

Hvac branch line circuit
Diagnosis procedure 1.Check connector Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal Check the terminals and connectors of the a/c auto amp. For damage, bend and loose connection (unit side and connector side). Is the inspection result normal? ...

Accelerator pedal released position learning
Description Accelerator Pedal Released Position Learning is a function of ECM to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sensor output signal. It must be performed each time harness connector of accelerator pedal position sensor ...

В© 2014-2025 Copyright www.nisentra.com