Sport mode switch
Component function check
1. Check sport mode switch operation
Is the inspection result normal? Yes >> inspection end.
No >> proceed to dms-71, "diagnosis procedure".
Diagnosis procedure
Regarding wiring diagram information, refer to dms-65, "wiring diagram".
1.Detect malfunctioning items
What is malfunction items? Sport mode switch illumination does not turns on>>go to 2.
Sport mode indicator lamp does not turns on>>go to 8.
2.Check sport mode switch illumination power supply (1)
Is the inspection result normal? Yes >> go to 3.
No >> go to 4.
3.Check intermittent incidente
Refer to gi-39, "intermittent incident".
Is the inspection result normal? Yes >> replace sport mode switch. Refer to dms-76, "removal and installation".
No >> replace the fuse after repair the applicable circuit.
4.Check sport mode switch illumination power supply (2)
Check the voltage between sport mode switch harness connector and ground.
Is the inspection result normal? Yes >> go to 7.
No >> go to 5.
5.Check fuse
Is the inspection result normal? Yes >> go to 6.
No >> replace the fuse after repair the applicable circuit.
6.Check sport mode switch illumination power supply circuit
Is the inspection result normal? Yes >> perform ipdm e/r auto active test and check tail lamp relay operation. Refer to pcs-9, "diagnosis description" (with intelligent key), pcs-37, "diagnosis description" (without intelligent key).
No >> repair or replace error-detected parts.
7.Check ground circuit
Is the inspection result normal? Yes >> check intermittent incident. Refer to gi-39, "intermittent incident".
No >> repair or replace error-detected parts.
8.Check sport mode switch circuit
Is the inspection result normal? Yes >> go to 13.
No >> go to 9.
9.Check ground circuit
Is the inspection result normal? Yes >> go to 10.
No >> repair or replace damaged parts.
10.Check circuit between combination meter and sport mode switch (1)
Is the inspection result normal? Yes >> go to 11.
No >> repair or replace damaged parts.
11.Check circuit between combination meter and sport mode switch (2)
Check continuity between combination meter harness connector terminal and sport mode switch harness connector terminal.
Is the inspection result normal? Yes >> go to 12.
No >> repair or replace damaged parts.
12.Check combination meter input/output signal
Is the inspection result normal? Yes >> check intermittent incident. Refer to gi-39, "intermittent incident".
No >> replace combination meter. Refer to mwi-77, "removal and installation".
13.Check sport mode switch
Check sport mode switch. Refer to dms-37, "component inspection".
Is the inspection result normal?
Yes >> check intermittent incident. Refer to gi-39, "intermittent incident".
No >> replace sport mode switch. Refer to dms-39, "removal and installation".
Component inspection
1.Check sport mode switch
Check continuity between sport mode switch connector terminals.
Is the inspection result normal? Yes >> inspection end
No >> replace sport mode switch. Refer to dms-76, "removal and installation".
Driving in vehicle-to-vehicle distance control mode - Dynamic radar cruise
control
This mode employs a radar to detect the presence of vehicles up to
approximately 328 ft. (100 m) ahead, determines the current vehicle-to-
vehicle following distance, and operates to maintain a suitable following
distance from the vehicle ahead. The desired vehicle-to-vehicle
distance can also b ...
Difference between predicted and actual distances
The distance guide line and the vehicle width
guide line should be used as a reference only
when the vehicle is on a level, paved surface. The
distance viewed on the monitor is for reference
only and may be different than the actual distance
between the vehicle and displayed objects.
Backing u ...
Liquid Gasket
REMOVAL OF LIQUID GASKET SEALING
After removing the bolts and nuts, separate the mating surface and
remove the liquid gasket using Tool (A).
Tool Number : KV10111100 (J-37228)
CAUTION:
Be careful not to damage the mating surfaces.
In areas where the cutter is difficult to use, use ...