Diagnosis Procedure
1.Check front power window motor (driver side)
Check front power window motor (driver side).
Refer to pwc-43, "driver side : diagnosis procedure".
Is the inspection result normal? Yes >> go to 2.
No >> repair or replace the malfunctioning parts.
2.Replace power window main switch
Is the result normal? Yes >> inspection end
NO >> Check intermittent incident. Refer to GI-39, "Intermittent Incident".
Periodic maintenance
REAR WHEEL HUB
Inspection
COMPONENT PART
Check the mounting conditions (looseness, back lash) of each component and
component conditions (wear,
damage) are normal.
WHEEL HUB ASSEMBLY (BEARING-INTEGRATED TYPE)
Check the following items, and replace the part it necessary.
Move wheel hub as ...
Shift position indicator circuit
Component Parts Function Inspection
1.CHECK SHIFT POSITION INDICATOR
Start the engine.
Shift selector lever.
Check that the selector lever position and the shift position indicator
on the combination meter are identical.
Is the inspection result normal?
YES >> INSPECTION END
N ...
Precaution for Liquid Gasket
Removal of liquid gasket
After removing the bolts and nuts, separate the mating surface and
remove the old liquid gasket using tool.
Tool number : kv10111100 (j-37228)
Caution:
Do not damage the mating surfaces.
Tap the seal cutter to insert it (1).
In areas where the tool is diffic ...