Nissan Sentra Service Manual: Door outside molding
Exploded view
- Front door assembly
- Grommet
- Front door outside molding
- Rear door outside molding
- Rear door assembly
- Door glass
Clip
Front door outside molding
FRONT DOOR OUTSIDE MOLDING : Removal and Installation
REMOVAL
- Remove front door mirror. Refer to MIR-18, "DOOR MIRROR ASSEMBLY : Removal and Installation".
- Remove front door outside molding screw (A).
- Apply protective tape (A) to protect the component from damage.
- Release rear end of front door outside molding clip using suitable tools (A,B).
Clip
- Rotate and lift as shown to remove the front door outside molding.
INSTALLATION
Installation is in the reverse order of removal.
Rear door outside molding
Rear door outside molding : removal and installation
REMOVAL
- Apply protective tape (A) to protect the component from damage.
- Release clip of rear door outside molding front and rear end, using suitable tools (A, B).
: Clip
CAUTION:
Use care when lifting rear door outside molding to prevent damage.
- Rotate and lift as shown to remove the rear door outside molding.
INSTALLATION
Installation is in the reverse order of removal.
Door sash tape
Exploded view
Front door sash upper tape
Front door assembly
Rear door assembly
Front door sash rear tape
Rear door sash front tape
Rear door sash rear tape
Rear door sash upper ta ...
Door parting seal
Exploded View
Rear door panel
Rear door parting seal
Front door parting seal
Front door panel
Pawl
Front
Removal and Installation
Release parting seal pawls, then remove parti ...
Other materials:
Precaution for Brake Control System
Always perform a pre-driving check to drive the vehicle.
Always check speed and safety while driving the vehicle.
To operate CONSULT while driving, more than one person is
required to be in the vehicle to avoid interference
to driving and ensure safety.
Slight vibrations ar ...
DTC/circuit diagnosis
U1000 CAN COMM CIRCUIT
Description
CAN (Controller Area Network) is a serial communication system for real time
application. It is an on-vehicle
multiplex communication system with high data communication speed and excellent
error detection ability.
Many electronic control units are equip ...
Diagnosis system (EPS control unit)
CONSULT Function
FUNCTION
CONSULT can display each diagnostic item using the diagnostic
test modes shown following.
Diagnostic test mode
Function
ECU identification
The part number stored in the control unit can be read.
Self diagnostic result
Self-diagnostic r ...
