Nissan Sentra manuals

Nissan Sentra Service Manual: Door mirror remote control switch

Removal and Installation

Removal

  1. Remove the instrument finisher D. Refer to IP-14, "Exploded View".
  2. Using suitable tool (a) release the pawls and remove the door mirror remote control switch (2) from the switch bracket (1).

Pawl


Installation


Installation

Installation is in the reverse order of removal.

Door mirror
Exploded view Door mirror cover (with side turn signal lamp) Door mirror housing Door mirror actuator Glass mirror Door mirror cover (without side turn signal lamp) : Pawl Doo ...

Exterior lighting system
...

Other materials:

B00A0 OCS System
Description DTC B00A0 OCCUPANT CLASSIFICATION SYSTEM (OCS) The OCS control unit is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will monitor the OCS for failures and interruptions in communication between the OCS control unit and the air bag diagnosis sensor ...

Rear disc brake
BRAKE PAD BRAKE PAD : Exploded View Upper sliding pin bolt Lower sliding pin bolt Bushing Cylinder body Inner shim cover Inner shim Inner pad (with pad wear sensor) Pad retainer Torque member Outer pad Outer shim Outer shim cover Apply rubber grease Molykote A ...

P0127 IATSensor
DTC Logic DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible cause P0127 IAT SENSOR-B1 (Intake air temperature too high) Rationally incorrect voltage from the sensor is sent to ECM, compared with the ...

В© 2014-2022 Copyright www.nisentra.com