Nissan Sentra manuals

Nissan Sentra Service Manual: Door mirror

Exploded view


  1. Door mirror cover (with side turn signal lamp)
  2. Door mirror housing
  3. Door mirror actuator
  4. Glass mirror
  5. Door mirror cover (without side turn signal lamp)

Door mirror assembly : Pawl


Door mirror assembly

Door mirror assembly : removal and installation

Removal

Caution:

Be careful not to scratch or damage the door mirror body when removing.

  1. Remove front door finisher. Refer to int-15, "removal and installation".
  2. Disconnect door mirror harness connector.
  3. Remove door mirror nuts and the door mirror assembly.

Installation

Installation is in the reverse order of removal.

Glass mirror

Glass mirror : removal and installation

Removal

  1. Put a strip of protective tape (A) on housing assembly.


  1. Insert a suitable tool (a) into the recess at lower side between glass mirror (1) and actuator (2), and push up pawls to remove glass mirror lower side in the order shown.


  1. Insert a suitable tool at (LH and RH) side between glass mirror and actuator, and push up pawls to remove glass mirror (LH and RH) side.
  2. Disconnect door glass mirror heater harness connectors (if equipped).
  3. Remove door glass mirror.

Installation

Installation is in the reverse order of removal.

Caution:

After installation, visually check that pawls are securely engaged.

Door mirror cover

Door mirror cover : removal and installation

Removal

Note:

With side turn signal lamp shown, without is similar.

  1. Remove door glass mirror. Refer to mir-18, "glass mirror : removal and installation".
  2. Using a suitable tool, disengage door mirror cover pawls to separate the door mirror cover (1) from the door mirror assembly (2).

Pawl


Installation


Installation

Installation is in the reverse order of removal.

Caution:

After installation, visually check that pawls are securely engaged.

Inside mirror
Exploded view Manual mirror Windshield glass Inside mirror base Inside mirror assembly Auto anti-dazzle mirror Windshield glass Inside mirror base Harness connector Mirr ...

Door mirror remote control switch
Removal and Installation Removal Remove the instrument finisher D. Refer to IP-14, "Exploded View". Using suitable tool (a) release the pawls and remove the door mirror remote cont ...

Other materials:

Using the interior lights
Interior lights list Front interior/personal lights Shift lever light (if equipped) Inside door handle lights (if equipped) Rear interior light (if equipped) Rear personal lights (if equipped) Door courtesy lights (if equipped) Instrument panel ornament light (if equipped) Fro ...

Unexpected pedal reaction
Diagnosis Procedure 1.CHECK BRAKE PEDAL STROKE Check brake pedal stroke. Refer to BR-15, "Adjustment". Is the stroke too big? YES >> Bleed air from brake line and hose. Refer to BR-17, "Bleeding Brake System". Check brake pedal, brake booster, and maste ...

Rear combination lamp
Exploded View Rear combination lamp Rear turn signal lamp bulb Rear turn signal lamp socket LED lamp harness connector Rear combination lamp harness connector Back-up lamp bulb socket Back-up lamp bulb Disassembly and Assembly DISASSEMBLY WARNING: Do not touch bulb whil ...

В© 2014-2024 Copyright www.nisentra.com