Common item
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
Direct Diagnostic Mode | Description |
ECU identification | The BCM part number is displayed. |
Self Diagnostic Result | The BCM self diagnostic results are displayed. |
Data Monitor | The BCM input/output data is displayed in real time. |
Active Test | The BCM activates outputs to test components. |
Work support | The settings for BCM functions can be changed. |
Configuration |
|
CAN DIAG SUPPORT MNTR | The result of transmit/receive diagnosis of CAN communication is displayed. |
SYSTEM APPLICATION
BCM can perform the following functions.
Int lamp
Int lamp : consult function (bcm - int lamp)
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
* : Initial setting
Battery saver
Battery saver : consult function (bcm - battery saver)
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
* : Initial setting
Precautions for drive shaft
Observe the following precautions when disassembling and assembling drive
shaft.
Do not disassemble joint sub-assembly because it is non-overhaul parts.
Perform work in a location which is as dust-free as possible.
Clean the parts, before disassembling and assembling.
Prevent the entry o ...
P0447 EVAP Canister vent control valve
DTC Logic
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
Possible cause
P0447
VENT CONTROL VALVE
(Evaporative emission system vent
control circuit open)
An improper voltage signal is sent to
ECM throug ...
Wiring diagram
Power window system
Wiring Diagram
...