Common item
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
Direct Diagnostic Mode | Description |
ECU identification | The BCM part number is displayed. |
Self Diagnostic Result | The BCM self diagnostic results are displayed. |
Data Monitor | The BCM input/output data is displayed in real time. |
Active Test | The BCM activates outputs to test components. |
Work support | The settings for BCM functions can be changed. |
Configuration |
|
CAN DIAG SUPPORT MNTR | The result of transmit/receive diagnosis of CAN communication is displayed. |
SYSTEM APPLICATION
BCM can perform the following functions.
Int lamp
INT LAMP : CONSULT Function (BCM - INT LAMP)
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
*: Initial setting
Battery saver
Battery saver : consult function (bcm - battery saver)
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
*: Initial setting
Controls
Fan control dial
The fan control dial turns the fan on and off, and
controls fan speed.
Air flow control buttons
The air flow control buttons allow you to select
the air flow outlets.
MAX — Air flows from center and side
A/Cvents with maximum cooling.
— Air flows from center and side
v ...
Front wiper motor lo circuit
Component function check
1. Check front wiper lo operation
Ipdm e/r auto active test
Start ipdm e/r auto active test. Refer to pcs-9, "diagnosis description"
(with intelligent key system) or
pcs-37, "diagnosis description" (without intelligent key system).
Check tha ...
Starter motor drive control
STARTER MOTOR DRIVE CONTROL : System Description
SYSTEN DIAGRAM
*1: CVT models
*2: M/T models
INPUT/OUTPUT SIGNAL CHART
Sensor
Input signal to ECM
ECM function
Actuator
Crankshaft position sensor (POS)
Engine speed
Piston position
Starter ...