Toyota Camry (XV70): Customization
Customizable features
Your vehicle includes a variety of electronic features that can be personalized to suit your preferences. The settings of these features can be changed using the multi-information display, on the audio system screen, or at your Toyota dealer.
Customizing vehicle features
When customizing vehicle features, ensure that the vehicle is parked in a safe place with the shift lever in P and the parking brake set.
■ Changing on the audio system screen
1. Press the "MENU" button.
2. Select "Setup" on the "Menu" screen.
3. Select "Vehicle" on the "Setup" screen.
4. Select "Vehicle Customization".
Various setting can be changed. Refer to the list of settings that can be changed for details.
Customizable features
Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer for further details.
- Settings that can be changed on the audio system screen
- Settings that can be changed by your Toyota dealer
Definition of symbols: O = Available,
= Not available
■ Gauges, meters and multi-information display
*: The default setting varies according to country.
■ Door lock
*: Vehicles with a smart key system
■ Smart key system* and wireless remote control
*: If equipped
■ Smart key system*
*: If equipped
■ Wireless remote control
■ Power windows, and moon roof* or panoramic moon roof*
*: If equipped
■ Moon roof*
*: If equipped
■ Automatic light control system
■ Lights
■ Intuitive parking assist*
*: If equipped
■ BSM (Blind Spot Monitor)*
*: If equipped
■ RCTA (Rear Cross Traffic Alert)*
*: If equipped
■ Automatic air conditioning system*
*: If equipped
■ Illumination
*1: Vehicles with a smart key system
*2: If equipped
WARNING
■During customization
As the engine needs to be running during customization, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.
NOTICE
■During customization
To prevent battery discharge, ensure that the engine is running while customizing features.
Items to initialize
The following items must be initialized for normal system operation after such cases as the battery being reconnected, or maintenance being performed on the vehicle:
READ NEXT:
Reporting safety defects
for U.S. owners
If you believe that your vehicle has a defect which could cause a
crash or could cause injury or death, you should immediately inform
the National Highway Traffic Safety Administration (NHTSA) in ad
Seat belt instructions
for Canadian owners
(in French)
The following is a French explanation of seat belt instructions
extracted from the seat belt section in this manual.
See the seat belt section for more detailed seat belt instructions in
English.
SEE MORE:
Vehicle Speed Signal Circuit between Navigation ECU and Combination Meter
DESCRIPTION The navigation ECU receives a vehicle speed signal from the combination meter assembly.
HINT:
A voltage of 12 V or 5 V is output from each ECU and then input to the combination meter assembly. The signal is changed to a pulse signal at the transistor in the combination meter assemb
AHB (Automatic High
Beam)
The Automatic High Beam uses a front camera located behind
the upper portion of the windshield to assess the brightness of
the lights of vehicles ahead, streetlights, etc., and automatically
turns the high beams on or off as necessary.
WARNING
■Limitations of the Automatic High Beam
Do not o
