Inspection procedure
If the CONSULT cannot diagnose the system properly, check the following items.
Symptom | Check item |
CONSULT cannot access any system. |
|
CONSULT cannot access individual system. (Other systems can be accessed.) |
|
NOTE:
The DDL2 circuits and CAN communication lines from DLC pins 6, 7 and 14 may be connected to more than one system. A short in a DDL circuit or CAN lines connected to a control unit in one system may affect CONSULT access to other systems. For a complete DDL circuit layout, refer to GI-49, "Wiring Diagram". For a complete CAN line layout, refer to LAN-33, "Wiring Diagram".
Main power supply and ground circuit
Diagnosis Procedure
1.CHECK TCM POWER CIRCUIT (PART 1)
Turn ignition switch OFF.
Disconnect TCM connector.
Check voltage between TCM harness connector terminals and ground.
Is the inspection result normal?
YES >> GO TO 2.
NO >> GO TO 4.
2.CHECK TCM POWER CIRCUIT (PAR ...
Automatic air conditioning
system (with "SYNC"
button)
Air outlets and fan speed are automatically adjusted according
to the temperature setting.
Air conditioning controls
â– Adjusting the temperature setting
To adjust the temperature setting, turn
clockwise to increase
the temperature and counterclockwise to decrease the temperature.
If i ...
Air conditioner system refrigerant and oil recommendations
The air conditioner system in your NISSAN
vehicle must be charged with the refrigerant
HFC-134a (R-134a) and NISSAN A/C
system oil Type S or the exact equivalents.
CAUTION
The use of any other refrigerant or oil will
cause severe damage to the air conditioning
system and will require the repl ...