Nissan Sentra Service Manual: Component parts
Component parts location
- BCM (view with instrument panel removed)
- Key switch (without Intelligent Key)
- Push-button ignition switch (with Intelligent Key)
- IPDM E/R
- Illumination control switch
- Combination switch (lighting and turn signal switch)
- Front door lock LH (key cylinder switch)
- Front door switch LH (RH similar)
- Rear door switch LH (RH similar)
- Main power window and door lock/unlock switch
- Power window and door lock/unlock switch RH
- Trunk lid opener assembly
Component description
| Part name | Description |
| BCM | Provides power and ground and controls timer functions for the interior room lamp, map lamp and trunk room lamp. |
| IPDM E/R | Provides power and ground and controls timer functions for the interior room lamp, map lamp and trunk room lamp |
| Push-button ignition switch (with Intelligent Key) | Provides ignition switch status to the BCM. |
| Key switch (without Intelligent Key) | Provides key in ignition switch status to the BCM. |
| Door switches | Provides door OPEN/CLOSED status to the BCM. |
| Main power window and door lock/unlock switch | Provides door lock/unlock switch LH status to the BCM. |
| Power window and door lock/unlock switch RH | Provides door lock/unlock switch RH status to the BCM. |
| Front door lock assembly LH (key cylinder switch) | Provides door lock/unlock switch LH status to the BCM. |
| Trunk lid opener assembly | Provides trunk lid OPEN/CLOSED status to the BCM. |
System
Interior room lamp control system
INTERIOR ROOM LAMP CONTROL SYSTEM : System Diagram
WITH INTELLIGENT KEY
WITHOUT INTELLIGENT KEY
INTERIOR ROOM LAMP CONTROL SYSTEM : System Description
OU ...
Other materials:
Symptom diagnosis
The sport mode indicator lamp does not turn on
Description
The sport mode indicator lamp does not turn on when the sport mode switch is
operated.
Diagnosis procedure
1.Perform combination meter on board diagnosis
Perform combination meter on board diagnosis. Refer to mwi-16, "descriptio ...
Rear door
Door assembly
DOOR ASSEMBLY : Removal and Installation
CAUTION:
Use two people when removing or installing the rear door assembly
due to its heavy weight.
When removing and installing rear door assembly, support rear door
with a suitable tool.
REMOVAL
Remove rear do ...
C1716, C1717, C1718, C1719 Transmitter (pressure data)
DTC Logic
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following
functions. Refer to the Signal Tech II
User Guide for additional information.
Activate and display TPMS transmitter IDs
Display tire pressure reported by the TPMS transmitter
Read TPMS DTCs
Register ...
