Nissan Sentra Service Manual: Component parts

Nissan Sentra Service Manual / Body exterior, doors, roof & vehicle security / Power window control system / System description / Component parts

Component Parts Location

BCM (view under instrument panel on the left side of the vehicle)
Front power window motor LH (RH similar) (view with front door finisher removed)
Rear power window motor LH (RH similar) (view with rear door finisher removed)
Main power window and door lock/ unlock switch
Power window and door lock/unlock switch RH
Rear power window switch RH (LH similar)
Front door lock assembly LH (key cylinder switch)
Front door switch LH (RH similar)

Component Description

FRONT POWER WINDOW LH ANTI-PINCH SYSTEM

Component	Function
BCM	Supplies power to power window switches. Controls retained power.
Front power window motor LH	Integrates the ENCODER POWER and WINDOW MOTOR. Starts operating with signals from main power window and door lock/unlock switch. Transmits power window motor rotation as a pulse signal to main power window and door lock/unlock switch.
Front power window motor RH	Starts operating with signals from main power window and door lock/unlock switch & power window and door lock/unlock switch RH.
Main power window and door lock/unlock switch	Directly controls all power window motor of all doors. Controls anti-pinch operation of front power window LH.
Power window and door lock/unlock switch RH	Controls front power window motor RH.
Rear power window switch	Controls rear power window motors LH and RH.
Rear power window motor	Starts operating with signals from main power window and door lock/unlock switch & rear power window switch.
Front door switch LH or RH	Detects door open/close condition and transmits to BCM.

System

System Diagram FRONT POWER WINDOW LH ANTI-PINCH SYSTEM System Description MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH INPUT/OUTPUT SIGNAL CHART Item Input signal to main power win ...

Other materials:

Fuel injector
Component Function Check 1.INSPECTION START Turn ignition switch to START. Is any cylinder ignited? YES >> GO TO 2. NO >> Proceed to EC-450, "Diagnosis Procedure". 2.CHECK FUEL INJECTOR FUNCTION With CONSULT Start engine. Perform вЂњPOWER BALANCEвЂќ in � ...

Removal and installation
Horn Exploded view Horn high Horn low Front Note: Shown with the front fascia removed for clarity. Removal and installation Horn low Removal Remove the core support cover. Refer to ext-23, "removal and installation". Disconnect the horn low harness connectors. ...

Drive plate
Exploded View Pilot converter Drive plate Reinforcement plate Chamfered Removal and Installation REMOVAL Remove the engine and the transaxle assembly from the vehicle, and separate the transaxle from the engine. Refer to EM-86, "CVT : Exploded View". Remov ...