Nissan Sentra manuals

Nissan Sentra Service Manual: Cluster lid A

Removal and Installation

REMOVAL

  1. Release cluster lid A clips and pawls using a suitable tool.

Metal clip : Pawl


Metal clip



  1. Remove cluster lid A.

INSTALLATION

Installation is in the reverse order of removal.

Center console assembly
Exploded View Center console upper finisher Center console side finisher (RH) Center console side finisher (LH) Center console side finisher screw cover (LH/ RH) Center console asse ...

Cluster lid C
Removal and Installation - Cluster Lid C REMOVAL Remove cluster lid C lower. Refer to IP-20, "Removal and Installation - Cluster Lid C Lower". Remove the cluster lid C screws (A). ...

Other materials:

Low tire pressure warning lamp does not turn oFF
Low Tire Pressure Warning Lamp Stays On When Ignition Switch Is Turned On DIAGNOSTIC PROCEDURE 1.INSPECT BCM CONNECTOR Turn ignition switch OFF. Disconnect BCM connectors. Check terminals for damage or loose connections. Is the inspection result normal? YES >> GO TO 2. NO > ...

P0122, P0123 TP Sensor
DTC Logic DTC DETECTION LOGIC NOTE: If DTC P0122 or P0123 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643. Refer to EC-353, "DTC Logic". DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible caus ...

B2267 engine speed
Description The engine speed signal is transmitted from ecm to the combination meter via can communication. Dtc logic Dtc detection logic Dtc Consult Detection condition Possible malfunction location B2267 Tacho meter [b2267] ECM continuously transmits abnorma ...

В© 2014-2026 Copyright www.nisentra.com