DTC Logic
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PERFORM SELF DIAGNOSTIC RESULT
With CONSULT
Is DTC “C1704”, “C1705”, “C1706”, or “C1707” detected? YES >> Proceed to WT-25, "Diagnosis Procedure".
NO >> Inspection End.
Diagnosis Procedure
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.
1.CHECK DATA MONITOR
With CONSULT
Monitor item | Displayed value |
AIR PRESS FL | Approximately equal to value indicated on tire gauge for front LH tire |
AIR PRESS FR | Approximately equal to value indicated on tire gauge for front RH tire |
Monitor item | Displayed value |
AIR PRESS RR | Approximately equal to value indicated on tire gauge for rear RH tire |
AIR PRESS RL | Approximately equal to value indicated on tire gauge for rear LH tire |
Is the inspection result normal? YES >> Inspection End.
NO >> Repair or replace malfunctioning components.
P099B Shift solenoid G
DTC Logic
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
Possible causes
P099B
SHIFT SOLENOID G
(Shift Solenoid G Control Circuit
Low)
The TCM high clutch & reverse brake solenoid
valve current monitor ...
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
driver and front passenger for certain
types of collision. Information necessary to service the system ...
Rear seat belt
Exploded View - Seat Belt Retractor
Seat belt retractor (RH)
Seat belt retractor (center)
Seat belt retractor (LH)
Front
Removal and Installation - Seat Belt Retractor
REMOVAL
Remove the rear parcel shelf finisher. Refer to INT-33, "Removal and
Installation".
Re ...