Description
The headlamps (both sides) do not switch to high beam when the lighting switch is in the hi or pass setting.
Diagnosis procedure
1.Combination switch (lighting and turn signal switch) inspection
Check the combination switch (lighting and turn signal switch). Refer to bcs-72, "symptom table" (with intelligent key system) or bcs-125, "symptom table" (without intelligent key system).
Is the inspection results normal? Yes >> go to 2
No >> repair or replace the malfunctioning part.
2.Check headlamp (hi) request signal input
Consult data monitor
Is the inspection results normal? YES >> GO TO 3
NO >> Replace BCM. Refer to BCS-73, "Removal and Installation" (with Intelligent Key system) or BCS- 126, "Removal and Installation" (without Intelligent Key system).
3.Headlamp (hi) circuit inspection
Check the headlamp (hi) circuit. Refer to exl-88, "diagnosis procedure".
Is the inspection results normal? Yes >> replace ipdm e/r. Refer to pcs-30, "removal and installation" (with intelligent key system) or pcs-58, "removal and installation" (without intelligent key system).
No >> repair or replace the malfunctioning part.
LATCH (Lower Anchors and Tethers for CHildren) System
WARNINGFailure to follow the warnings and
instructions
for proper use and installation of
child restraints could result in serious injury
or death of a child or other passengers
in a sudden stop or collision:
Attach LATCH system compatible
child restraints only at ...
Wiring diagram
Rear window defogger system
Wiring diagram
...
Precaution
Precaution for supplemental restraint system (srs) "air bag" and "seat
belt pre-tensioner"
The supplemental restraint system such as “air bag” and “seat belt pre-tensioner”,
used along
with a front seat belt, helps to reduce the risk or severity of injur ...