Nissan Sentra Service Manual: Body interior

Removal and installation

A/C ASSEMBLY SWITCH Removal and Installation Removal Remove the cvt shift selector finisher (cvt: re0f11a). Refer to tm-253, "removal and installation". Remove the MT shift select ...

Interior

...

Other materials:

Description
NOTICE: Trouble diagnoses indicate work procedures required to diagnose problems effectively. Observe the following instructions before diagnosing. Before performing trouble diagnoses, read the “Work Flow” in each section. After repairs, re-check that the problem has been comp ...

VDC/TCS/ABS
Symptom Table If ABS warning lamp and SLIP indicator lamp turn ON, perform self-diagnosis. NOTE: 1: The ABS does not operate when the speed is 10 km/h (6 MPH) or less. 2: Under the following conditions, ABS is activated and vibration is felt when brake pedal is lightly depr ...

Low tire pressure warning lamp
Component Function Check 1.CHECK THE ILLUMINATION OF THE LOW TIRE PRESSURE WARNING LAMP Check that the low tire pressure warning lamp is turned OFF after illuminating for approximately 1 second, when the ignition switch is turned ON. Is the inspection result normal? YES >> Inspection ...