Nissan Sentra manuals

Nissan Sentra Service Manual: Body control system

Service data and specifications (SDS)
Power Socket ...

With intelligent key system
...

Other materials:

Glove box assembly
Removal and Installation REMOVAL Remove the instrument side finisher RH using a suitable tool. Remove the glove box assembly upper screws (A). Remove the glove box assembly lower screws (A). Disconnect the harness connectors from the trunk switch and glove box lamp, the ...

Precaution for Harness Repair
Solder the repair part, and wrap it with tape. [Twisted wire fray must be 110 mm (4.33 in) or less.] Do not bypass the repair point with wire. (If it is bypassed, the turnout point cannot be separated and the twisted wire characteristics are lost.) ...

DTC/circuit diagnosis
P1610 LOCK MODE Description ECM forcibly switches to the mode that inhibits engine start, when engine start operation is performed 5 times or more while communication between ECM and BCM is not normal. DTC Logic DTC DETECTION LOGIC NOTE: If DTC P1610 is displayed with other DTC (for BCM or ...

В© 2014-2025 Copyright www.nisentra.com