Nissan Sentra Service Manual: Basic inspection

Preparation

Commercial Service Tool ...

Parking brake system

Inspection and Adjustment INSPECTION Lever Stroke Operate the parking brake lever with a force of 196 N (20.0 kg-f, 44.1 lb-f). Check that the lever stroke is within the specified number ...

Other materials:

C1704, C1705, C1706, C1707 Low tire pressure
DTC Logic NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS transmitter IDs Display tire pressure reported by the TPMS transmitter Read TPMS DTCs Register ...

Precaution for Harness Repair
Solder the repair part, and wrap it with tape. [Twisted wire fray must be 110 mm (4.33 in) or less.] Do not bypass the repair point with wire. (If it is bypassed, the turnout point cannot be separated and the twisted wire characteristics are lost.) ...

Shift lock system
Component Function Check 1.CHECK SHIFT LOCK OPERATION (PART 1) Turn ignition switch ON. Shift the selector lever to park “P” position. Attempt to shift the selector lever to any other position with the brake pedal released. Can the selector lever be shifted to any other posi ...