Diagnosis and repair workflow
Work Flow
Overall sequence
Detailed flow
1.Get information for symptom
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred).
>> GO TO 2.
2.Confirm the symptom
Try to confirm the symptom described by the customer. Verify relation between the symptom and the condition when the symptom is detected.
>> Go to 3.
3.Detect malfunctioning part by diagnostic procedure
Inspect according to Diagnostic Procedure of the system.
Is malfunctioning part detected? YES >> GO TO 4.
NO >> GO TO 2.
4.Repair or replace the malfunctioning part
>> GO TO 5.
5.Final check
Refer to confirmed symptom in step 2, and make sure that the symptom is not detected.
Was the repair confirmed? Yes >> inspection end.
No >> go to 2.
Intake manifold
Exploded View
Clamp
PCV hose
Bracket
Intake manifold gasket
Intake manifold
Mount rubber
Clamp
EVAP hose
EVAP canister purge volume
control solenoid valve
Electric throttle control actuator gasket
Electric throttle control actuator
Clamp
Water hose
Water hose
...
B2267 engine speed
Description
The engine speed signal is transmitted from ecm to the combination meter via
can communication.
Dtc logic
Dtc detection logic
Dtc
Consult
Detection condition
Possible malfunction location
B2267
Tacho meter
[b2267]
ECM continuously transmits abnorma ...
Spark plugs
Replacing spark plugs
WARNINGBe sure the engine and ignition switch are
off and that the parking brake is engaged
securely.
CAUTION
Be sure to use the correct socket to remove
the spark plugs. An incorrect socket
can damage the spark plugs.
Platinum-tipped spark plugs (ex ...