Description
The engine coolant temperature signal is transmitted from ecm to the combination meter via can communication.
Dtc logic
Dtc detection logic
Dtc | Consult | Detection condition | Probable malfunction location |
B2268 | Water temp meter [b2268] | Ecm continuously transmits abnormal engine coolant temperature signals for 60 seconds or more |
|
Diagnosis procedure
1.Perform self-diagnosis of ecm
Perform Self Diagnostic Result of ECM, and repair or replace malfunctioning parts.
>> Refer to EC-66, "CONSULT Function".
Rear regulator
Exploded View
Rear door panel
Rear door glass regulator motor
Rear door glass regulator
Rear door glass
Rear door glass rubber run
Removal and Installation
NOTE:
RH rear door panel shown; LH side similar
REMOVAL
Remove the rear door finisher. Refer to INT-19, "Removal ...
Basic inspection
Diagnosis and repair workflow
Work flow
OVERALL SEQUENCE
DETAILED FLOW
1.INTERVIEW FOR MALFUNCTION
Find out what the customer's concerns are.
>> GO TO 2.
2.SYMPTOM CHECK
Verify the symptom from the customer's information.
>> GO TO 3.
3.BASIC INSPECTION
Check the operat ...
Positioning a floor jack
When using a floor jack, follow the instructions in the manual
provided with the jack and perform the operation safely.
When raising your vehicle with a floor jack, position the jack correctly.
Improper placement may damage your vehicle or cause
injury.
â—† Front
â—† Rear
2WD models
...