Nissan Sentra manuals

Nissan Sentra Owners Manual: Audible reminders

Brake pad wear warning

The disc brake pads have audible wear warnings.

When a disc brake pad requires replacement, it makes a high pitched scraping sound when the vehicle is in motion, whether or not the brake pedal is depressed. Have the brakes checked as soon as possible if the warning sound is heard.

Key reminder chime

A chime sounds if the driver’s door is opened while the key is left in the ignition switch. Remove the key and take it with you when leaving the vehicle.

Light reminder chime

With the ignition switch placed in the OFF position, a chime sounds when the driver’s door is opened if the headlights or parking lights are on.

Turn the headlight control switch off before leaving the vehicle.

NISSAN Intelligent Key® door buzzer (if so equipped)

The Intelligent Key door buzzer sounds if any one of the following improper operations is found.

When the buzzer sounds, be sure to check both the vehicle and the Intelligent Key. See “NISSAN Intelligent Key®” in the “Pre-driving checks and adjustments” section.

Parking brake reminder chime

A chime sounds if the parking brake is set and the vehicle is driven. The chime will stop if the parking brake is released or the vehicle speed returns to zero.

Indicator lights
Continuously Variable Transmission (CVT) position indicator light (if so equipped) When the ignition switch is placed in the ON position, this indicator light shows the transmission shift leve ...

Security systems
Your vehicle may have two types of security systems: Vehicle security system (if so equipped) NISSAN Vehicle Immobilizer System ...

Other materials:

Difference between predicted and actual distances
The distance guide line and the vehicle width guide line should be used as a reference only when the vehicle is on a level, paved surface. The distance viewed on the monitor is for reference only and may be different than the actual distance between the vehicle and displayed objects. Backing u ...

Precaution for Liquid Gasket
REMOVAL OF LIQUID GASKET After removing nuts and bolts, separate the mating surface, using Tool and remove old liquid gasket. Tool number : KV10111100 (J-37228) CAUTION: Be careful not to damage the mating surfaces. Tap (1) Tool to insert it, and then slide it (2) by tapping on t ...

Engine compartment check locations
MRA8DE engine Engine oil filler cap Brake and clutch (if so equipped) fluid reservoir Air cleaner Battery Fuse/fusible link box Engine coolant reservoir Radiator cap Engine oil dipstick Drive belt location Windshield-washer fluid reservoir ...

© 2014-2022 Copyright www.nisentra.com