Nissan Sentra B18 (2020-2025) Service Manual: The Braking Distance Is Long
Diagnosis Procedure
Brake stopping distance is long when ABS function is operated.
CAUTION:
Brake stopping distance on a slippery road like a rough road, gravel road or snowy road may become longer when ABS is operated than when ABS is not operated.
-
CHECK BRAKE FORCE
-
Check brake force using a brake tester.
Is the inspection result normal?
YES >>GO TO 2.
NO >>Check each component of brake system.
-
-
CHECK BRAKE PERFORMANCE
-
Disconnect ABS actuator and electric unit (control unit) harness connector so that ABS does not operate. Check brake stopping distance in this condition. Connect harness connector after checking.
Is the inspection result normal?
YES >>Inspection End.
NO >>Check each component of brake system.
-
Unexpected Brake Pedal Reaction
Diagnosis Procedure
Diagnosis Procedure
A malfunction of brake pedal feel (height or
other) is detected when brake pedal is depressed.
CHECK FRONT AND REAR AXLE
...
Does Not Operate
Diagnosis Procedure
Diagnosis Procedure
VDC function, TCS function, ABS function, EBD
function or brake assist function does not operate.
CAUTION:
VDC function, TCS f ...
Other materials:
Fuel efficient driving tips
Follow these easy-to-use Fuel Efficient Driving
Tips to help you achieve the most fuel economy
from your vehicle.
Use Smooth Accelerator and Brake
Pedal Application
Avoid rapid starts and stops
Use smooth, gentle accelerator and
brake application whenever possible
Maintain consta ...
B00a0-02 Occupant Detection System Control Unit
Dtc Description
DTC Description
DESCRIPTION
DTC B00A0–02 OCCUPANT CLASSIFICATION
SYSTEM (OCS)
The OCS control unit is wired to the air bag
diagnosis sensor unit. The air bag diagnosis sensor unit will
monitor the OCS for failures and interruptions in communication
betwee ...
Diagnosis and Repair Work Flow
Work Flow
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
GET INFORMATION FOR SYMPTOM
Get detailed information from the customer about
the symptom (the condition and the environment when the incident/malfunction
...
