Toyota Camry Owner's Manual (2023): RSA (Road Sign Assist)
Summary of function
The RSA system recognizes specific road signs using the front camera and/or navigation system (when speed limit information is available) to provide information to the driver via the display.
If the system judges that the vehicle is being driven over the speed limit, performing prohibited actions, etc. according to the recognized road signs, it notifies the driver through a visual notification and notification buzzer*.
*: This setting needs to be customized.
WARNING
â– Before using the RSA
Do not rely solely upon the RSA system. RSA is a system which supports the driver by providing information, but it is not a replacement for a driver's own vision and awareness. Drive safely by always paying careful attention to the traffic rules.
Indication on the multi-information display
When the front camera recognizes a sign and/or information of a sign is available from the navigation system, the sign will be displayed on the multi-information display.
- When the driving assist system information is selected, a maximum of 3 signs can be displayed.
- When a tab other than the driving
assist system information is
selected, the following types of
road signs will be displayed.
- Speed limit sign
- Do Not Enter sign (when notification is necessary)
If signs other than speed limit signs are recognized, they will be displayed in an overlapping stack under the current speed limit sign.
Supported types of road signs
The following types of road signs, including electronic signs and blinking signs, are recognized.
A non-official or a recently introduced traffic sign may not be recognized.
Indications on multi-information display - LTA (Lane Tracing
Assist)
The illustration used is intended as an example, and may differ from
the image that is actually displayed on the multi-information display.
LTA indicator
The illumination condition of the
ind ...
Notification function - RSA (Road Sign Assist)
In the following situations, the RSA system will notify the driver.
When the vehicle speed exceeds the speed notification threshold of
the speed limit sign displayed, the sign display will be em ...
Other materials:
Checking bulbs
With all doors closed, apply the parking brake
and place the ignition switch in the ON position
without starting the engine. The following lights
will come on:
If equipped, the following lights come on briefly
and then go off:
If any light fails to come on, it may indicate
an open circuit ...
Precaution for Work
When removing or disassembling each component, be careful not to damage
or deform it. If a component
may be subject to interference, be sure to protect it with a shop cloth.
When removing (disengaging) components with a screwdriver or similar
tool, be sure to wrap the component
with a ...
Removal and installation
Ipdm e/r
Exploded view
Ipdm e/r
IPDM E/R cover A
Ipdm e/r cover b
Removal and installation
Caution:
Ipdm e/r integrated relays are not serviceable and must not be removed
from unit.
Removal
Remove inlet air duct (upper). Refer to em-25, "removal and
installation" ...
