Nissan Sentra B18 (2020-2025) Service Manual: Rear Seat Belt Buckle Switch. Removal and Installation
Removal and Installation
Warning:
-
Before servicing the SRS, place the ignition switch in the OFF position, disconnect both battery terminals then wait at least three minutes.
-
Do not use air tools or electric tools for servicing the rear seat belt buckle switch.
The rear seat belt buckle switch is serviced as part of the rear seat belt buckle. For removal and installation of the rear seat belt buckle, refer to Removal and Installation.
Other materials:
P1217 Engine over temperature
DTC Logic
DTC DETECTION LOGIC
NOTE:
If DTC P1217 is displayed with DTC UXXXX, first perform the trouble
diagnosis for DTC UXXXX.
If DTC P1217 is displayed with DTC P0607, first perform the trouble
diagnosis for DTC P0607. Refer
to EC-350, "DTC Logic".
If the cooling fan ...
Cannot Set Automatic Speed Control Device (ascd)
Diagnosis Procedure
Diagnosis Procedure
PERFORM SELF-DIAGNOSIS
With CONSULT
Perform ECM self-diagnosis.
Is DTC detected?
YES >>
Perform diagnosis of applicable.
NO >>
GO TO 2.
CHECK BRAKE PEDAL POSITION SWITCH
...
Parking brake switch
Component Function Check
1.CHECK PARKING BRAKE SWITCH OPERATION
Check that brake warning lamp in combination meter turns ON/OFF
when parking brake is actuated.
Is the inspection result normal?
YES >> Inspection End.
NO >> Proceed to diagnosis procedure. Refer to BRC-90, " ...