Nissan Sentra B18 (2020-2025) Service Manual: Precautions for Suspension
-
When installing rubber bushings, the final tightening must be carried out under unladen conditions with tires on ground. Spilled oil might shorten the life of rubber bushings. Be sure to wipe off any spilled oil.
-
Unladen conditions mean that fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
-
-
After servicing suspension parts, be sure to check wheel alignment.
-
Self-lock nuts are not reusable. Always use new ones when installing. Since new self-lock nuts are pre-oiled, tighten as they are.
-
The tightening surface must be kept free from oil/grease.
-
When jacking up the Nissan Sentra vehicle with a floor jack, do not hang the jack on the suspension beam.
Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as
“AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used alo ...
Other materials:
Oil Filter
Removal and Installation
Removal and Installation
REMOVAL
Remove the
front under cover. Refer to Removal and Installation.
Using
suitable tool (A), remove the oil filter (1).
CAUTION:
Oil filter is provided with relief valve.
Be ...
Component Inspection
Component Inspection
CHECK BATTERY TEMPERATURE SENSOR
Ignition switch OFF.
Disconnect battery current sensor connector.
Check the resistance between bat ...
Dtc Diagnosis Procedure
DTC Diagnosis Procedure
PERFORM SELF DIAGNOSIS RESULT
CONSULT
Ignition switch ON.
Erase "Self Diagnostic Result" mode of "EPS/DAST
3".
...
