Nissan Sentra B18 (2020-2025) Service Manual: Precautions for Suspension
-
When installing rubber bushings, the final tightening must be carried out under unladen conditions with tires on ground. Spilled oil might shorten the life of rubber bushings. Be sure to wipe off any spilled oil.
-
Unladen conditions mean that fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
-
-
After servicing suspension parts, be sure to check wheel alignment.
-
Self-lock nuts are not reusable. Always use new ones when installing. Since new self-lock nuts are pre-oiled, tighten as they are.
-
The tightening surface must be kept free from oil/grease.
-
When jacking up the Nissan Sentra vehicle with a floor jack, do not hang the jack on the torque rod.
Precaution for Procedure Without Cowl Top Cover
Precaution for Procedure without Cowl Top Cover
When performing the procedure after removing cowl
top cover, cover the lower end of windshield with urethane, etc to
prevent damage to windshi ...
Other materials:
Dtc Description
DTC Description
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure reported by the TPMS ...
Parking brake
WARNING
Be sure the parking brake is fully released
before driving. Failure to do so
can cause brake failure and lead to an
accident.
Do not release the parking brake from
outside the vehicle.
Do not use the shift lever in place of the
parking brake. When parki ...
Heated Steering Wheel System
System Description
System Description
SYSTEM DIAGRAM
INPUT SIGNAL AND OUTPUT SIGNAL
Switch
Input signal to A/C auto amp.
A/C auto amp. function
...
