Nissan Sentra manuals

Nissan Sentra Service Manual: Power control system

Can communication circuit
Diagnosis procedure 1.Connector inspection Turn the ignition switch off. Disconnect the battery cable from the negative terminal. Disconnect all the unit connectors on CAN communication syste ...

IPDM E/R (With i-key)
...

Other materials:

P1574 ASCD Vehicle speed sensor
Description The ECM receives two vehicle speed sensor signals via CAN communication line. One is sent from combination meter, and the other is from TCM (Transmission control module). The ECM uses these signals for ASCD control. Refer to EC-51, "AUTOMATIC SPEED CONTROL DEVICE (ASCD) : Sys ...

Changing engine oil filter
Park the vehicle on a level surface and apply the parking brake. Turn the engine off. Place a large drain pan under the oil filter C . Loosen the oil filter with an oil filter wrench by turning it counterclockwise. Then remove the oil filter by turning it by hand. CAUTION Be c ...

Brake master cylinder
Inspection Check for brake fluid leakage at the following areas: Master cylinder mounting face Reservoir tank mounting face Brake tube and brake tube connections Brake hose and brake hose connections If any brake fluid leakage is found, repair as necessary. On Board Inspection LEAK ...

В© 2014-2024 Copyright www.nisentra.com