Fill with oil for the amount that is calculated according to the following conditions.
Example:
Oil amount to be added when replacing evaporator and liquid tank
[m
(US fl oz, Imp fl oz)] = 45 (1.5, 1.6) + 15 (0.5,
0.5) + α
|
Conditions |
Oil amount to be added to A/C system m |
|
|---|---|---|
|
Replace evaporator |
75 (2.5, 2.6) |
|
|
Replace condenser |
75 (2.5, 2.6) |
|
|
Replace liquid tank |
5 (0.2, 0.2) |
|
|
Refrigerant leakage is detected |
Large amount leakage |
30 (1.0, 1.1) |
|
Small amount leakage |
— |
|
|
Oil amount that is recycled together with refrigerant during recycle operation |
α |
|
Perform Oil Return Operation
Oil Adjusting Procedure for Compressor ReplacementC1729 Vehicle speed signal
DTC Logic
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following
functions. Refer to the Signal Tech II
User Guide for additional information.
Activate and display TPMS transmitter IDs
Display tire pressure reported by the TPMS transmitter
Read TPMS DTCs
Registe ...
Storage pouch
A storage pouch is located on the front of the
driver’s and passenger’s seats.
WARNING
Do not store angular, sharp, heavy objects
or objects that cannot fully fit inside
the pouch because they might increase
the likelihood of an injury in a
crash.
To ensure ...
Diagnosis Procedure
Diagnosis Procedure
CHECK AUTO-ANTI DAZZLING INSIDE
MIRROR SYSTEM
Check auto anti-dazzling inside mirror
system.
Is the inspection result normal?
YES >>
GO TO
2.
NO >>
Repair ...