Nissan Sentra manuals

Nissan Sentra Service Manual: ECU diagnosis information

BCM

List of ECU Reference

Wiring diagram


Diagnosis system (BCM) (without intelligent key system)
Common item Common item : consult function (bcm - common item) APPLICATION ITEM CONSULT performs the following functions via CAN communication with BCM. Direct Diagnostic Mode Descriptio ...

Wiring diagram
Tire pressure monitoring system With intelligent key WITH INTELLIGENT KEY : Wiring Diagram Without intelligent key WITHOUT INTELLIGENT KEY : Wiring Diagram ...

Other materials:

Push starting
CAUTION Do not push start this vehicle. The three-way catalyst may be damaged. Continuously Variable Transmission (CVT) models and Manual Transmission (MT) cannot be push-started or towstarted. Attempting to do so may cause transmission damage For manual transmission (MT) models, ...

Compression pressure
Inspection Warm up the engine to full operating temperature. Release fuel pressure. Refer to EC-143, "Work Procedure". Remove ignition coil and spark plug from each cylinder. Refer to EM-46, "Exploded View". Connect engine tachometer (not required in use of CONSULT). ...

Brake and clutch (if so equipped) fluid
For further brake and clutch fluid specification information, refer to “Recommended fluids/lubricants and capacities” in the “Technical and consumer information” section of this manual. WARNING Use only new fluid from a sealed container. Old, inferior or contaminated ...

© 2014-2025 Copyright www.nisentra.com