Customizable features
Your vehicle includes a variety of electronic features that can be personalized to suit your preferences. The settings of these features can be changed using the multi-information display, on the audio system screen, or at your Toyota dealer.
Customizing vehicle features
When customizing vehicle features, ensure that the vehicle is parked in a safe place with the shift lever in P and the parking brake set.
â– Changing on the audio system screen
1. Press the "MENU" button.
2. Select "Setup" on the "Menu" screen.
3. Select "Vehicle" on the "Setup" screen.
4. Select "Vehicle Customization".
Various setting can be changed. Refer to the list of settings that can be changed for details.
Customizable features
Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer for further details.
Definition of symbols: O = Available,
= Not available
â– Gauges, meters and multi-information display
*: The default setting varies according to country.
â– Door lock
*: Vehicles with a smart key system
â– Smart key system* and wireless remote control
*: If equipped
â– Smart key system*
*: If equipped
â– Wireless remote control
â– Power windows, and moon roof* or panoramic moon roof*
*: If equipped
â– Moon roof*
*: If equipped
â– Automatic light control system
â– Lights
â– Intuitive parking assist*
*: If equipped
â– BSM (Blind Spot Monitor)*
*: If equipped
â– RCTA (Rear Cross Traffic Alert)*
*: If equipped
â– Automatic air conditioning system*
*: If equipped
â– Illumination
*1: Vehicles with a smart key system
*2: If equipped
WARNING
â– During customization
As the engine needs to be running during customization, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.
NOTICE
â– During customization
To prevent battery discharge, ensure that the engine is running while customizing features.
Items to initialize
The following items must be initialized for normal system operation after such cases as the battery being reconnected, or maintenance being performed on the vehicle:
B1428 Seat belt buckle switch LH
Description
DTC B1428 SEAT BELT BUCKLE SWITCH LH
The air bag diagnosis sensor unit monitors the seat belt buckle switch LH
status. If the control unit detects an
open or short condition in the circuit, it will set the DTC.
PART LOCATION
Refer to SRC-5, "Component Parts Location".
...
P0447 EVAP Canister vent control valve
DTC Logic
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
Possible cause
P0447
VENT CONTROL VALVE
(Evaporative emission system vent
control circuit open)
An improper voltage signal is sent to
ECM throug ...
B14XX Air bag diagnosis sensor unit
Description
DTC B14XX AIR BAG DIAGNOSIS SENSOR UNIT
The air bag diagnosis sensor unit will run self diagnostics when the ignition
switch is turned ON. It has the
potential to set many diagnostic trouble codes which will conform to the B14XX
format, but will not match any
other SRS diagnosti ...