Nissan Sentra B18 (2020-2025) Service Manual: Axle and Suspension Parts
Inspection
Check front and rear axle and suspension parts for excessive play, cracks, wear or other damage.
-
Shake each wheel to check for excessive play.
-
Check wheel bearings for smooth operation.
-
Check axle and suspension nuts and bolts for looseness.
-
Check strut (shock absorber) for oil leakage or other damage.
-
Check suspension ball joint for grease leakage and ball joint dust cover for cracks or other damage.
Steering Gear and Linkage
Inspection
Inspection
INSPECTION AFTER DISASSEMBLY
STEERING GEAR
Check steering gear housing and boots for
looseness, damage and grease leakage.
Check conn ...
Front Drive Shaft
Inspection
Inspection
Check the following items, and replace the part
if necessary.
Check drive
shaft mounting point and joint for looseness and other
damage.
CAUTION:
...
Other materials:
Turn signal lamp circuit
Description
The bcm monitors inputs from the combination switch to determine when to
activate the turn signals. The
bcm outputs voltage direction to the left and right turn signals during turn
signal operation or both during hazard
warning operation. The bcm sends a turn signal indicator req ...
Vehicle identification
Vehicle Identification Number (VIN) plate
The Vehicle Identification Number (VIN) plate on your Nissan Sentra is attached
in the location shown. This unique VIN serves as the primary identification number
for the vehicle and is used for vehicle registration, insurance, warranty tracking,
...
ECU diagnosis information
A/C AUTO AMP
Reference Value
VALUES ON THE DIAGNOSIS TOOL
TERMINAL LAYOUT
PHYSICAL VALUES
DTC Inspection Priority Chart
If some DTCs are displayed at the same time, perform inspections one by one
based on the following priority
chart.
DTC Index
*: Perform self ...