Toyota Camry (XV70): Tires
Replace or rotate tires in accordance with maintenance schedules
and treadwear.
Checking tires
Check if the treadwear indicators are showing on the tires. Also check
the tires for uneven wear, such as excessive wear on one side of the
tread.
Check the spare tire condition and pressure if not rotated.
- New tread
- Worn tread
- Treadwear indicator
The location of treadwear indicators is shown by a "TWI" or ""
mark,
etc., molded into the sidewall of each tire.
Replace the tires if the treadwear indicators are showing on a tire.
Tire rotation
Rotate the tires in the order
shown.
To equalize tire wear and extend
tire life, Toyota recommends that
tire rotation is carried out at the
same interval as tire inspection.
Do not fail to initialize the tire
pressure warning system after
tire rotation.
READ NEXT:
Your vehicle is equipped with a tire pressure warning system that uses
tire pressure warning valve and transmitters to detect low tire inflation
pressure before serious problems arise.
Vehicles wit
Tire inflation pressure
The recommended cold tire inflation pressure and tire size are displayed
on the tire and loading information label.
Inspection and adjustment procedure
Tire valve
Ti
If a wheel is bent, cracked or heavily corroded, it should be
replaced. Otherwise, the tire may separate from the wheel or
cause a loss of handling control.
Wheel selection
When replacing wheels,
SEE MORE:
DESCRIPTION This DTC is stored when a malfunction occurs in the stereo component amplifier assembly.
DTC No. Detection Item
DTC Detection Condition Trouble Area
B15A3 Stereo Component Amplifier Malfunction
When any of the following conditions is met:
Internal
DESCRIPTION This DTC is stored when an open circuit or short occurs in the communication line between the front corner ultrasonic sensor LH and the front center ultrasonic sensor LH, or when a malfunction occurs in the front corner ultrasonic sensor LH.
DTC No. Detection Item
DTC Detect