Toyota Camry owners & service manuals

Toyota Camry (XV70): If your vehicle has to be stopped in an emergency

Toyota Camry Owner's Manual XV70 (2017-2024) / When trouble arises / Essential information / If your vehicle has to be stopped in an emergency

Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following procedure:

1. Steadily step on the brake pedal with both feet and firmly depress it.

Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.

2. Shift the shift lever to N.

If the shift lever is shifted to N

3. After slowing down, stop the vehicle in a safe place by the road.

4. Stop the engine.

If the shift lever cannot be shifted to N

3. Keep depressing the brake pedal with both feet to reduce vehicle speed as much as possible.

4. Vehicles without a smart key system: Stop the engine by turning the engine switch to the "ACC" position.

Essential information

Vehicles with a smart key system: To stop the engine, press and hold the engine switch for 2 consecutive seconds or more, or press it briefly 3 times or more in succession.

Essential information

5. Stop the vehicle in a safe place by the road.

WARNING

■If the engine has to be turned off while driving

  • Power assist for the brakes and steering wheel will be lost, making the brake pedal harder to depress and the steering wheel heavier to turn.

    Decelerate as much as possible before turning off the engine.

  • Vehicles without a smart key system: Never attempt to remove the key, as doing so will lock the steering wheel.

    READ NEXT:

     If the vehicle is submerged or water on the road is rising

    This vehicle is not designed to be able to drive on roads that are deeply flooded with water. Do not drive on roads where the roads may be submerged or the water may be rising. It is dangerous to r

     Steps to take in an emergency

     If your vehicle needs to be towed

    If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or commercial towing service, using a wheel-lift type truck or flatbed truck. Use a safety chain system for al

    SEE MORE:

     Installation

    INSTALLATION PROCEDURE 1. INSTALL NAVIGATION ANTENNA BRACKET 2. INSTALL NAVIGATION ANTENNA ASSEMBLY (a) Engage the 6 guides and 2 claws to install the navigation antenna assembly as shown in the illustration. *A w/o Manual (SOS) Switch *B w/ Manual (SOS) Switch I

     Reassembly

    REASSEMBLY CAUTION / NOTICE / HINT CAUTION: If the rear disc brake cylinder assembly has been disassembled, perform air bleeding for the rear disc brake cylinder assembly. Click here NOTICE: Make sure not to scratch, damage or apply excessive force to any of the internal components of th

    © 2023-2024 Copyright www.tocamry.com